Submersible pumps do not need to build a special pump house, which reduces the engineering cost of the pump station by 30% and greatly reduces the cost.
Submersible pumps will not occupy ground space, and it is more suitable to use them near irregular or narrow rivers or buildings.
If there are residents living near the pump station, in order to minimize noise, submersible pumps are also suitable.
In addition, in some scenic spots or parks, the submersible pumps will not affect or damage the surrounding environment.
The submersible pump does not need to build the additional pump house, which can save a lot of engineering costs, does not occupy surface space, there is no impact on the surrounding environment.
Submersible pumps are lubricated and cooled by water, so installation and maintenance are very simple.
Because the submersible pump runs underwater, the noise generated by it is much lower than that of other dry-type pumps, and it will not cause noise pollution to the surrounding residents.
The electric motor and the water pump are integrated without a long driveshaft, which is light in weight and small in space.
The submersible axial flow pump is low flow and high head
The submersible sewage pump is low flow and high head
If you need a high-pressure pump, you can choose a submersible sewage pump
Diypumps can provide you with high-quality submersible sewage pumps
Submersible pumps include submersible axial flow pumps, submersible mixed flow pumps, submersible sewage pumps, etc.
Diypumps can provide the vertical type and horizontal type submersible axial flow pumps, vertical type, and horizontal type submersible mixed flow pumps, submersible sewage pumps, submersible tube pumps, and other submersible pumps for customers to choose from.
The price of different submersible pumps will vary according to different performance parameters. The price of the submersible pump will be different if the material used is different.
Contact Diypumps, we will provide you with the best offer.
Yes, the submersible pump can always be underwater.
But if the submersible pump is not used for a long time, the pump needs to be lifted out of the water and stored in a dry place to avoid corrosion due to long periods of non-operation underwater.
In theory, the submersible pump can run continuously for 24 hours.
In actual use, if a liquid level sensor or float switch is installed, when the liquid level drops to the set height, the submersible pump will automatically stop running. At this time, the submersible pump is in a cooling-off state and will run again when the liquid level rises to the set height.
Therefore, it is feasible for the submersible pump to operate continuously for 24 hours. After a long period of operation, the pump needs to be lifted out of the water for maintenance.